I got the replacement touch screen yesterday, and spent the evening putting it in place. I placed it on top of the LCD and taped the sides down for some enhanced security. Did a small test and everything works! I will spend the rest of this week fine tuning the internal cabling and hopefully get a start on the bezel & a cover for the bottom portion of the tablet top.
As you can see I moved the internal cable that is sticking out at the top to the bottom. I'll also try to secure all the external wiring, as well as the connector board, to the back. It is kind of ugly with all of that cabling, but if I can organize it well enough, it shouldn't be a problem for the meantime (until I learn how to solder internally)!
l
Update (10PM PST):
Turns out that having the cable come out the bottom end was a bad idea. After testing, whenever I put pressure on the screen, I could see the cable pressing from behind. To remedy this, I raised the screen mount slightly. Now there is more room for air circulation and cables.
No comments:
Post a Comment